RockJock: ANTIROCK® FRONT SWAY BAR KIT RJ-246100-101 – JT (& HEAVY JL) (FORGED ARMS, .850″ BAR)

Description

The RockJock® Antirock® Sway Bar Kit for the front of all Jeep® JT Gladiator models (& heavy JLs) helps free up suspension articulation to increase off-road traction. The Antirock sway bar easily bolts on with hand tools and is designed to directly replace the vehicle’s stock front sway bar. The Antirock does not require disconnecting for off-road use!
The sway bar is made of 4130 heat treated chromoly for ultimate strength, which is the same quality used in professional off-road competition sway bars.

*This kit is based off of a JT with aftermarket bumpers 37″ tires, 37″ spare and no other additional weight added (overlanding equipment, etc.).

Kit Fits:

Jeep Gladiator JT – All Models (Mojave – see notes)
(Heavily Loaded) Jeep Wrangler JL Unlimited (4-door) – All Diesel, 392 & Hybrid Models
(Heavily Loaded) Jeep Wrangler JL (2-door) – All Diesel, 392 & Hybrid Models

Kit Includes:

.850” diameter 4130 heat treated chromoly sway bar
Fabricated steel bolt-on frame brackets
Forged chromoly offset sway bar arms
Adjustable Sway Bar Links
Delrin Sway Bar Bushings
All Required Hardware & step-by-step instructions

Notes:

Overlanding Equipped/Heavily Loaded JT Applications – This kit includes a .850” diameter sway bar. We recommend the use of our RJ-246100-103 kit, that features a 1” bar to handle the extra weight. However, this kit may still be used on these vehicle models in applications where a lighter weight sway bar is desired.
Installing on a JL – This kit is recommended for use on overlanding equipped and heavily loaded JLs to accommodate extra weight.
Still not heavy enough? We also offer a 1″ diameter bar in our RJ-246100-103 kit, however, we recommend calling our staff to discuss before deciding upon this option for a JL.
Rubicon Models – Jeep JL and JT Rubicon models equipped with the electronic sway bar, will require the use of a tuner (Tazer or equivalent) to turn off the sway bar dash light when the factory sway bar is removed.
JT Gladiator Mojave Models – This kit will work on Mojave models and bolt-on exactly the same, however, if the factory Mojave shocks are retained, the shock reservoirs will have to be relocated to allow the installation of the Antirock Sway Bar kit.
Body Roll – Antirock sway bar equipped vehicles will exhibit more body roll than vehicles equipped with the stock sway bar. Antirock sway bars may be used on the street, however, they do not provide the same handling characteristics as the stock sway bar.
End Links – Out of the box, the length of the sway bar’s vertical links that are included in this kit are intended for use with our suspension systems (4” lift). You may obtain shorter or longer links, to suit your application here.
Sway Bar Disconnects – If you are installing this Antirock Sway Bar kit in place of JKS sway bar disconnects, the sway bar disconnects would have had you cut part of the sway bar link mounting bracket off of the passenger’s side of your axle housing. In this instance, to install the Antirock, you will need to replace the thru-bolt heim joint and the hardware that comes in the Antirock kit for that location with a CE-99006 studded heim joint. This studded heim joint will then install just like the driver’s side heim joint in this kit.

Instruction Manual:

RJ-246100-101 Kit

Installation Video:

RJ-246100-101 Kit

Kit Includes:

36″ x .850” Diameter Sway Bar Torsion Bar: CE-99001D
Sway Bar Frame Bracket (LH): RJ-241101-101
Sway Bar Frame Bracket (RH): RJ-241101-102
Forged Offset Sway Bar Arms (pair): RJ-202001-101
8 1/2″ Adjustable Sway Bar Links: RJ-243100-101
Sway Bar Bushing: CE-9901D
Sway Bar Arm Hardware Pack: CE-99005A